diff --git a/board/scb9328/flash.c b/board/scb9328/flash.c
new file mode 100644
index 0000000..1b56f8c
--- /dev/null
+++ b/board/scb9328/flash.c
@@ -0,0 +1,321 @@
+/*
+ * Copyright (C) 2003 ETC s.r.o.
+ *
+ * This code was inspired by Marius Groeger and Kyle Harris code
+ * available in other board ports for U-Boot
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Written by Peter Figuli <peposh@etc.sk>, 2003.
+ *
+ */
+
+#include <common.h>
+#include "intel.h"
+
+
+/*
+ * This code should handle CFI FLASH memory device. This code is very
+ * minimalistic approach without many essential error handling code as well.
+ * Because U-Boot actually is missing smart handling of FLASH device,
+ * we just set flash_id to anything else to FLASH_UNKNOW, so common code
+ * can call us without any restrictions.
+ * TODO: Add CFI Query, to be able to determine FLASH device.
+ * TODO: Add error handling code
+ * NOTE: This code was tested with BUS_WIDTH 4 and ITERLEAVE 2 only, but
+ *       hopefully may work with other configurations.
+ */
+
+#if ( SCB9328_FLASH_BUS_WIDTH == 1 )
+#  define FLASH_BUS vu_char
+#  if ( SCB9328_FLASH_INTERLEAVE == 1 )
+#    define FLASH_CMD( x ) x
+#  else
+#    error "With 8bit bus only one chip is allowed"
+#  endif
+
+
+#elif ( SCB9328_FLASH_BUS_WIDTH == 2 )
+#  define FLASH_BUS vu_short
+#  if ( SCB9328_FLASH_INTERLEAVE == 1 )
+#    define FLASH_CMD( x ) x
+#  elif ( SCB9328_FLASH_INTERLEAVE == 2 )
+#    define FLASH_CMD( x ) (( x << 8 )| x )
+#  else
+#    error "With 16bit bus only 1 or 2 chip(s) are allowed"
+#  endif
+
+
+#elif ( SCB9328_FLASH_BUS_WIDTH == 4 )
+#  define FLASH_BUS vu_long
+#  if ( SCB9328_FLASH_INTERLEAVE == 1 )
+#    define FLASH_CMD( x ) x
+#  elif ( SCB9328_FLASH_INTERLEAVE == 2 )
+#    define FLASH_CMD( x ) (( x << 16 )| x )
+#  elif ( SCB9328_FLASH_INTERLEAVE == 4 )
+#    define FLASH_CMD( x ) (( x << 24 )|( x << 16 ) ( x << 8 )| x )
+#  else
+#    error "With 32bit bus only 1,2 or 4 chip(s) are allowed"
+#  endif
+
+#else
+#  error "Flash bus width might be 1,2,4 for 8,16,32 bit configuration"
+#endif
+
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+static FLASH_BUS flash_status_reg (void)
+{
+
+	FLASH_BUS *addr = (FLASH_BUS *) 0;
+
+	*addr = FLASH_CMD (CFI_INTEL_CMD_READ_STATUS_REGISTER);
+
+	return *addr;
+}
+
+static int flash_ready (ulong timeout)
+{
+	int ok = 1;
+
+	reset_timer_masked ();
+	while ((flash_status_reg () & FLASH_CMD (CFI_INTEL_SR_READY)) !=
+		   FLASH_CMD (CFI_INTEL_SR_READY)) {
+		if (get_timer_masked () > timeout && timeout != 0) {
+			ok = 0;
+			break;
+		}
+	}
+	return ok;
+}
+
+#if ( CFG_MAX_FLASH_BANKS != 1 )
+#  error "SCB9328 platform has only one flash bank!"
+#endif
+
+
+ulong flash_init (void)
+{
+	int i;
+	unsigned long address = SCB9328_FLASH_BASE;
+
+	flash_info[0].size = SCB9328_FLASH_BANK_SIZE;
+	flash_info[0].sector_count = CFG_MAX_FLASH_SECT;
+	flash_info[0].flash_id = INTEL_MANUFACT;
+	memset (flash_info[0].protect, 0, CFG_MAX_FLASH_SECT);
+
+	for (i = 0; i < CFG_MAX_FLASH_SECT; i++) {
+		flash_info[0].start[i] = address;
+#ifdef SCB9328_FLASH_UNLOCK
+		/* Some devices are hw locked after start. */
+		*((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_LOCK_SETUP);
+		*((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_UNLOCK_BLOCK);
+		flash_ready (0);
+		*((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
+#endif
+		address += SCB9328_FLASH_SECT_SIZE;
+	}
+
+	flash_protect (FLAG_PROTECT_SET,
+				   CFG_FLASH_BASE,
+				   CFG_FLASH_BASE + monitor_flash_len - 1,
+				   &flash_info[0]);
+
+	flash_protect (FLAG_PROTECT_SET,
+				   CFG_ENV_ADDR,
+				   CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+	return SCB9328_FLASH_BANK_SIZE;
+}
+
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	printf (" Intel vendor\n");
+	printf ("  Size: %ld MB in %d Sectors\n",
+			info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; i++) {
+		if (!(i % 5)) {
+			printf ("\n");
+		}
+
+		printf (" %08lX%s", info->start[i],
+				info->protect[i] ? " (RO)" : "     ");
+	}
+	printf ("\n");
+}
+
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	int flag, non_protected = 0, sector;
+	int rc = ERR_OK;
+
+	FLASH_BUS *address;
+
+	for (sector = s_first; sector <= s_last; sector++) {
+		if (!info->protect[sector]) {
+			non_protected++;
+		}
+	}
+
+	if (!non_protected) {
+		return ERR_PROTECTED;
+	}
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+	flag = disable_interrupts ();
+
+
+	/* Start erase on unprotected sectors */
+	for (sector = s_first; sector <= s_last && !ctrlc (); sector++) {
+		if (info->protect[sector]) {
+			printf ("Protected sector %2d skipping...\n", sector);
+			continue;
+		} else {
+			printf ("Erasing sector %2d ... ", sector);
+		}
+
+		address = (FLASH_BUS *) (info->start[sector]);
+
+		*address = FLASH_CMD (CFI_INTEL_CMD_BLOCK_ERASE);
+		*address = FLASH_CMD (CFI_INTEL_CMD_CONFIRM);
+		if (flash_ready (CFG_FLASH_ERASE_TOUT)) {
+			*address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
+			printf ("ok.\n");
+		} else {
+			*address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
+			rc = ERR_TIMOUT;
+			printf ("timeout! Aborting...\n");
+			break;
+		}
+		*address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
+	}
+	if (ctrlc ())
+		printf ("User Interrupt!\n");
+
+	/* allow flash to settle - wait 10 ms */
+	udelay_masked (10000);
+	if (flag) {
+		enable_interrupts ();
+	}
+
+	return rc;
+}
+
+static int write_data (flash_info_t * info, ulong dest, FLASH_BUS data)
+{
+	FLASH_BUS *address = (FLASH_BUS *) dest;
+	int rc = ERR_OK;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*address & data) != data) {
+		return ERR_NOT_ERASED;
+	}
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+
+	flag = disable_interrupts ();
+
+	*address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
+	*address = FLASH_CMD (CFI_INTEL_CMD_PROGRAM1);
+	*address = data;
+
+	if (!flash_ready (CFG_FLASH_WRITE_TOUT)) {
+		*address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
+		rc = ERR_TIMOUT;
+		printf ("timeout! Aborting...\n");
+	}
+
+	*address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
+	if (flag) {
+		enable_interrupts ();
+	}
+
+	return rc;
+}
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong read_addr, write_addr;
+	FLASH_BUS data;
+	int i, result = ERR_OK;
+
+
+	read_addr = addr & ~(sizeof (FLASH_BUS) - 1);
+	write_addr = read_addr;
+	if (read_addr != addr) {
+		data = 0;
+		for (i = 0; i < sizeof (FLASH_BUS); i++) {
+			if (read_addr < addr || cnt == 0) {
+				data |= *((uchar *) read_addr) << i * 8;
+			} else {
+				data |= (*src++) << i * 8;
+				cnt--;
+			}
+			read_addr++;
+		}
+		if ((result = write_data (info, write_addr, data)) != ERR_OK) {
+			return result;
+		}
+		write_addr += sizeof (FLASH_BUS);
+	}
+	for (; cnt >= sizeof (FLASH_BUS); cnt -= sizeof (FLASH_BUS)) {
+		if ((result = write_data (info, write_addr,
+								  *((FLASH_BUS *) src))) != ERR_OK) {
+			return result;
+		}
+		write_addr += sizeof (FLASH_BUS);
+		src += sizeof (FLASH_BUS);
+	}
+	if (cnt > 0) {
+		read_addr = write_addr;
+		data = 0;
+		for (i = 0; i < sizeof (FLASH_BUS); i++) {
+			if (cnt > 0) {
+				data |= (*src++) << i * 8;
+				cnt--;
+			} else {
+				data |= *((uchar *) read_addr) << i * 8;
+			}
+			read_addr++;
+		}
+		if ((result = write_data (info, write_addr, data)) != 0) {
+			return result;
+		}
+	}
+	return ERR_OK;
+}